博客
Are your fired 热ers future-ready?
With increasingly stringent emission targets, 工业运营商需要优化他们的资产,以保持合规和竞争力.
炼油厂或石化设施中的燃烧加热器通常是温室气体排放的最大来源之一,因此为提高效率和减少排放提供了最大的机会.
到2050年,全球对氢的需求预计将增加8倍, 其中大部分将通过使用燃烧加热器的热过程产生, this process must be de碳ised, and soon, to achieve net-zero goals.
As a critical component to many chemical processes, 燃烧加热器将继续发挥关键作用,但需要以更有效和更环保的方式这样做.
Wood通过消除低效率,帮助下游运营商在能源转型过程中保持合规和盈利, 捕获和监测排放,并应用最新技术,以最大限度地利用燃烧的加热器, with minimal investment costs.
我们的行业从来没有像现在这样需要变革, in the way we treat our planet, and in how we live. 为一个共同的目标团结起来,为世界上最严峻的挑战寻找解决方案, 我们寻求新的可能性来改善今天和明天的世界.
许多燃烧加热器是几十年前建造的,以满足当时的规范. By applying the best available designs and updated equipment and materials 对于现有的加热器,我们可以回收大量目前浪费的能源.
提高燃烧加热器的效率每年可以减少数万吨的二氧化碳排放.
我们的专业知识和技术可以监测、管理和减少氮氧化物和二氧化碳的排放 design and supply of packaged retrofit and software solutions.
伍德还提供克劳斯硫磺技术与专有的酸性气体燃烧器设计,以管理和减少SOx排放:
With increasing clean hydrogen availability, 将Fuels从甲烷或精炼气体转换为清洁Fuels, 富氢燃气提供了一个短期的脱碳解决方案. 为了减少加热器的排放,伍德可以分析和更换现有的燃烧器:
大量的氢可以混合到现有的Fuels系统中,而不会产生重大影响. 典型燃烧器无需大改动即可容纳30%以上.
对于大型加热器来说,最清洁的选择是使用现有的方法将氮氧化物降低到非常低的水平.
Considerations include:
完全不燃烧的加热器是真正的下一代发展. 我们的工程师正致力于将电加热集成到现有的小型启动加热器的炉设计中, including electric air pre-热ers.
没有适当的控制,面向未来的解决方案是无效的.
运营商通常依赖第三方控制系统供应商, 而是通过将Woods的燃烧加热器技术与我们的内部自动化和控制解决方案相结合, plants can benefit from safer operations, higher reliability and optimised efficiency.
In addition, as new instrumentation is emerging, 我们改进了我们的燃烧加热器,并结合了氢火焰传感器的设计, draft control, oxygen levels and flame detection.
随着能源转型和循环经济推动新原料的采用, products and energy sources, Fuels将推动未来炼油和化工过程整合的根本性变革.
This in turn, will change the balances of mass, 热, Fuels, 碳, steam and electrical in industrial clusters, 影响现有燃烧加热器资产的整合.
我们的专家可以审查和重新配置这些加热器与最佳解决方案,以满足新的需求.